Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

若干生态农业的模式及其应用

本文根据浙江省生态农业的实践,总结出数种生态农业模式,叙述了各种模式的结构、功能、效益、特点及应用现状,提出了模式的适用对象和应用时需重点注意的问题。     

2A12铝合金在模拟溶液中的周浸腐蚀行为

采用干湿周浸实验、失重法和电化学阻抗谱研究了2A12铝合金在0.6mol/L NaCl和0.6mol/L NaCl 0.02mol/L NaHSO3两种溶液中的腐蚀行为与规律, 利用扫描电镜(SEM)、能谱(EDX)和红外光谱(FTIR) 观察分析腐蚀产物表面形貌、结构和组成,测试了材料的力学性能.研究表明,随腐蚀时间的延长,腐蚀产物不断增多,失重增加,力学性能下降,阻抗模值逐渐减小;腐蚀产物形貌以团状和块状为主,在0.6mol/L NaCl溶液中腐蚀产物主要为铝的氯化物和氧化铝,在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀产物主要为氧化铝、铝的硫酸盐水合物和铝的氯化物;由于NaCl和NaHSO3共同作用,2A12合金在0.6mol/L NaCl 0.02mol/L NaHSO3溶液中腐蚀电流密度高,阻抗模值相对较小,腐蚀速率较高,腐蚀后失重大,力学性能下降幅度较大,腐蚀更严重.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

仪化热电厂提高循环水浓缩倍率的措施

针对仪化热电厂将循环水用作冲灰水，导致浓缩倍率只有1.6，以及凝汽器铜管腐蚀结垢严重等问题，提出了隔断循环水与冲灰水的直接联系，实现闲路循环，对凝汽器铜管进行酸洗，并对循环水实施加缓蚀阻垢荆、杀菌剂和旁流过滤等办法，全部实施后产生了很好的效益，值得借鉴。     

干湿循环对三峡支流消落带沉积物中可转化态氮及其形态分布的影响

水体富营养化的形成与沉积物中氮素的"源-汇"关系密切,本研究选取三峡典型支流澎溪河消落带上、中、下这3个水文断面,160 m和170 m两个水位高程,0~20、20~40、40~60、60~80、80~100 cm共5个深度的沉积物样品,通过研究其总可转化态氮(TF-N)与各形态可转化态氮含量及分布特征,旨在揭示周期性水位变化对消落带沉积物氮释放的影响.结果表明,澎溪河消落带沉积物总氮含量在313.02~3 255.53 mg·kg-1之间,空间分布上呈上站位(渠口)中站位(高阳)下站位(双江)的趋势;总可转化态氮含量范围为288.54~1 123.27mg·kg-1,均值为639.40 mg·kg-1,空间分布趋势与总氮一致;TF-N中各形态氮的大小顺序为:OSF-N(有机态和硫化物结合态)IMOF-N(铁锰结合态)CF-N(碳酸盐结合态)IEF-N(离子交换态).沉积物中TF-N主要以OSF-N(50.9%)和IMOF-N(33.3%)形态存在.OSF-N很难释放,不易参与氮循环.IMOF-N受水文条件影响显著,表现为在低水位高程和下采样站位沉积物中含量更低.淹水胁迫、水体富营养化等情况下氧含量较低,相对还原条件下有利于其向水体释放.而TF-N及其形态分布在垂直深度上无显著差异.可见,三峡库区特殊调蓄水制度加速了澎溪河下游、低水位高程消落带沉积物中IMOF-N向水体的释放.     

几种牺牲阳极在干湿交替条件下的自放电行为比较

模拟海水与空气的干湿交替条件,对四种海船常用牺牲阳极的自放电行为进行了研究。通过测定工作电位、发生电流、溶解性能、溶解产物成分,分析了四种牺牲阳极在经历不同间浸工作周期后的电化学性能,特别是再活化性能。结果表明:在干湿交替条件下,Zn-Al-Cd阳极的电化学性能降低幅度最大,Al-Zn-In-Cd阳极次之,它们均不适合在此环境中使用;Al-Zn-In-Mg-Ti的电化学性能比前两者好,Al-Zn-In-Mg-Ga-Mn则最适合作为干湿交替环境中的牺牲阳极。     

冻融循环及有机肥配施对黑土中镉形态的影响

以黑龙江黑土为对象,研究了冻融循环及有机肥配施量对黑土中镉形态分布的影响。对配施不同有机肥的土壤样品进行5次冻融循环,采用电感耦合等离子质谱仪(ICP-MS)分析土壤样品中镉的赋存形态。结果表明,冻融循环数及有机肥的配施有助于降低黑土中的总镉量;冻融循环会促使黑土中的镉由交换态、碳酸盐结合态、有机结合态向铁锰氧化物结合态和残渣态转化,而增加有机肥配施量会使黑土中的镉由交换态向其他形态转化。因此,冻融循环及有机肥配施有助于降低土壤中镉的生物有效性,进而降低其环境风险。     

道路车辆电气及电子设备在振动试验中的应力循环和试验设计原则

本文试从振动试验的特点和受试样品承受振动激励的应力循环切入分析,为把握试验方案的拟订提供支持。同时也简要介绍了应力循环的计算方法,供试验人员参考使用。     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.